Canon Camera Preparation and Loading Checklist

Friday Evening.

c Charge Canon Batteries by putting one in Charger. Both will be receive charge due to being wired together in parallel.
c Erase any photos from Cameras. (Do NOT format SD card!)

Launch Day
Take:
c This Checklist
c 2 Canon Cameras (with SD cards installed)
c 2 Canon Batteries
c 3 New AA Lithium Batteries
c 1 Battery housing
c connecting wires
c 2 dummy plugs

@Launch Site

c Power on Canon 600
c Turn Flash Off
c Enter <ALT> programming
c Turn off RAW image acquisition (Uncheck box)
c Check "Ultimate Intervalometer" script settings. (30 sec between photos, 30 seconds before first photo, run forever)
c Start script.. check that photos are being taken every 30 seconds.
c Mount Camera in side of capsule

c Power on Canon 630
c Turn Flash Off
c Enter <ALT> programming
c Turn off RAW image acquisition (Uncheck box)
c Check "Ultimate Intervalometer" script settings. (30 sec between photos, 30 seconds before first photo, run forever)
c Start script.. check that photos are being taken every 30 seconds.
c Mount Camera in bottom of capsule


c Check switch on wiring harness OFF
c Install 3 AA Lithium Batteries in Housing
c Connect Housing to Harness
c Turn Switch ON
c Ensure that Battery levels in Canons Rise (Should approach 100%)
c Disable LCD screens on cameras by installing dead end plugs in AV out ports
c Secure Lithium Batteries and Housing in Capsule
c Final Check.. Cameras still snapping pictures every 30 seconds?
c DONE!